Daytona Rolesium 126502 specifications
The case measures 40 mm across and 12.2 mm thick, so it wears like any modern Daytona. Everything else will look familiar from the 2023 Daytonas, apart from three lines: the case metal, the bezel ceramic and the dial.
| Reference | 126502 |
|---|---|
| Collection | Cosmograph Daytona |
| Status | Current production |
| Introduced | 2026 |
| Case diameter | 40 mm |
| Case thickness | 12.2 mm |
| Case material | Rolesium (Oystersteel case with 950 platinum bezel ring and caseback ring) |
| Bezel | Anthracite monobloc Cerachrom bezel (zirconia enriched with tungsten carbide) with tachymetric scale, framed by a platinum ring |
| Dial options | White Grand Feu enamel |
| Crystal | Sapphire |
| Calibre | 4131 |
| Movement | Automatic column-wheel chronograph with vertical clutch, Superlative Chronometer, Chronergy escapement, blue Parachrom hairspring, Paraflex shock absorbers; Rolex Cotes de Geneve decoration |
| Power reserve | 72 hours |
| Water resistance | 100 m |
| Bracelet / strap | Oyster three-piece solid links in Oystersteel; Oysterlock folding safety clasp with Easylink 5 mm comfort extension link |
| Retail price (US) | US$57,800 |
| US retail in MYR (converted) | ≈ RM235,800 at 4.08; Malaysian list price not published |
Specifications checked against Rolex and independent references, October 2026. MYR figures marked ≈ are converted at 4.08 MYR per USD.
History and reference evolution
The 126502 has no predecessor. Rolex unveiled it at Watches & Wonders 2026 as an off-catalogue piece, meaning it does not appear in the standard collection and is not allocated through the usual retailer channel. It is the first Daytona in Rolesium, and it combines several features Rolex had never put together on a steel-based Daytona.
Rolesium on a chronograph
Until 2026, Rolesium belonged to the Yacht-Master. On the Daytona Rolesium 126502, the case middle and Oyster bracelet are Oystersteel, while a 950 platinum ring frames the bezel and another surrounds the caseback. As a result, the effect is subtle. Platinum and steel look alike, so most people will see a steel Daytona. That understatement is part of the appeal, and it is also why the reference number matters so much when you check one.
The Grand Feu enamel dial
The dial is white Grand Feu enamel: glass fired onto a metal base at high temperature. It has a depth and gloss that printed lacquer cannot copy. Also, hour markers and hands are white gold. Enamel is, however, brittle. A sharp knock can cause a chip or a hairline crack, which is permanent for value purposes. So the dial is both the main attraction and the main risk on this reference.
A new ceramic and a sapphire back
The anthracite Cerachrom bezel uses zirconia enriched with tungsten carbide, a new ceramic for Rolex. It gives a grey tone with a vintage feel, framed by the platinum ring. Underneath, a sapphire caseback shows calibre 4131. Earlier display-back Daytonas, such as the Le Mans 126529LN and the platinum 126506, used precious-metal cases. The 126502 is the first steel-based one.
126502 pre-owned prices compared
The table below shows n/a in every row, and that is deliberate. We set bands only when at least two reliable market data points support them. In October 2026, the Daytona Rolesium 126502 has only one known sale.
| Condition | What it means | USD | MYR (approx.) |
|---|---|---|---|
| Unworn, full set | Stickers or barely worn, box, card dated within ~2 years, all tags | n/a | n/a |
| Excellent, box & papers | Light wear, unpolished or lightly polished, warranty card present | n/a | n/a |
| Good, no papers | Normal wear, watch only or box only, service history helps | n/a | n/a |
| Polished or aftermarket parts | Soft case edges, replaced dial/bezel/bracelet, or non-Rolex parts | n/a | n/a |
Bands reflect asking and achieved prices from 2 public market sources in October 2026, rounded. Retail for comparison: US$57,800. Prices move; use them as a sense-check, not a quote.
Here is what we do know. The reported US price at launch is US$57,800, or EUR 56,160. We could not confirm it with the official retailer feeds we checked (Hamra, Finks, Cortina Watch and The Hour Glass), so it remains unverified. On the secondary market, one US dealer listed an unworn example at about US$200,000, and it sold. Other dealers show ‘price on request’. One sale does not make a market, so please do not read US$200,000 as a valuation.
What moves the price of this reference
Because it is off-catalogue, there is no standard allocation, and supply depends entirely on which clients Rolex chooses. After that, the dial dominates. Any crazing, chip or hairline in the enamel is serious, and buyers should inspect it under strong light. A complete set with a 2026 warranty card is essential. The anthracite bezel's condition matters too, since the new ceramic is untested on the used market. Finally, unworn and worn examples will likely separate sharply once more watches trade.
Where to check prices
For now, there is little to check. Malaysia has no official price, because the watch is not in the local online catalogue. Moreover, dealer listings worldwide are few, and most hide the price. In practice, the best approach is to watch the main auction houses and a handful of large dealers over the coming months. Each new public result will say more than any single asking price. Meanwhile, our used Rolex price guide explains how we build bands once enough data exists.
When a price is too good to be true
Here the red flag is simpler than on most Daytonas. Since the only known sale is several times the reported retail, a private seller offering a Daytona Rolesium 126502 near US$57,800 (about RM236,000) is almost certainly not offering a genuine, complete watch. The same applies to any listing that will not show the caseback, the dial under magnification or the card.
Genuine vs replica: how to check a 126502
Replicas of brand-new references often appear within months, usually by converting an existing steel Daytona replica. Fortunately, the 126502 combines several features that are expensive to imitate well. Start with those, then work through the general real vs fake Rolex guide.
The dial, bezel and back
- Enamel depth. Grand Feu enamel looks glossy and slightly deep, like porcelain. Lacquer or printed imitations look flat and plasticky under a loupe.
- White-gold hands and markers. Check that they are cleanly finished and evenly applied.
- Anthracite bezel with a platinum ring. The grey should be even, and the moulded tachymeter crisp. A black bezel, or one without a metal frame, is wrong.
- Sapphire caseback. It should show calibre 4131 with Rolex finishing, inside a platinum ring.
- Reference and card. 126502 between the lugs at 12, serial at 6 and on the rehaut, matching a 2026 warranty card.
Genuine: caseback
- Solid Oystersteel or gold, fluted edge for the case wrench
- No engraving on most models (some are factory-engraved, e.g. Sea-Dweller and Deepsea)
- Display backs are factory-fitted only on certain models (e.g. some Daytona, 1908, Land-Dweller)
Warning signs
- Exhibition window on a model Rolex makes with a solid back
- Stickers or decorative engravings sold as 'factory'
- Back that turns too easily or sits proud of the case
Genuine: rehaut engraving alignment
- Each engraved crown and letter lines up with its minute marker
- Engraving is crisp, even in depth, and readable at 12 o'clock
- Serial number engraved on the rehaut at 6 on modern pieces
Warning signs
- Letters drift between markers as they go around the ring
- Shallow, sandy-looking or uneven engraving
- Serial at 6 printed rather than engraved, or wrong format
Crown, pushers and crystal
The Triplock crown carries three marks under the coronet, and both pushers screw down smoothly. A faint laser-etched coronet sits in the crystal at 6. Replicas copy these well, so they rule out only poor fakes.
What only a watchmaker can confirm
A watchmaker can test the bezel and caseback rings for platinum using XRF, which is non-destructive. They can also check the 4131 through the back, including its Chronergy escapement and blue Parachrom hairspring, and confirm that the dial is enamel, not lacquer. Ask for a written report, especially given the price. Then confirm the serial and card with our serial number guide and box and papers guide.
Who the 126502 suits, and the alternatives
The Daytona Rolesium 126502 suits an established Rolex client or a collector who values craft over flash. It looks like a steel Daytona from across the room, yet the enamel dial and display back reward a closer look. That said, it is not a watch for anyone who needs price certainty, because the market has barely formed. It also needs careful wear, since the dial is fragile.
If you want a white-dial steel Daytona with a clear market price, the 126500LN Panda is the obvious choice. For platinum and a display back with a longer track record, look at the platinum 126506. And the Daytona collection page compares all twelve references side by side.
Owning an enamel-dial Daytona
Living with the 126502 takes some care. The sapphire crystal protects the dial from scratches; however, a hard knock still sends a shock through the case, and enamel does not flex. So treat it as a dress-sport watch rather than a gym watch. When it needs a service, use Rolex itself, and ask how the dial will be handled while the movement is out. Insurance is another practical point. Because there is no settled market price, insurers may struggle to agree a value. Consequently, keep the purchase invoice, the card and any dealer valuation, and ask for an agreed-value policy rather than one based on replacement cost.
Cosmograph Daytona 126500LN
Current steel Daytona with 4131 calibre, white Panda or black dial; trades near twice retail.
Cosmograph Daytona 126506
Ice-blue dial, chestnut Cerachrom bezel and a display back. The precious-metal Daytona that trades well over list.
Cosmograph Daytona 126529LN
2023–2024 white-gold Le Mans edition with calibre 4132, a 24-hour totaliser and sapphire caseback. Discontinued
126502 FAQ
How much does the Rolex Daytona 126502 cost?
The reported US price at launch is US$57,800 (EUR 56,160). Rolex does not publish it in its online catalogue, and we could not confirm it with official retailers, so treat it as unverified. On the secondary market, one US dealer listed an unworn example at about US$200,000, and it sold. Others quote price on request.
Why are there no pre-owned price bands for the 126502?
Because there is not enough evidence. We publish a band only when at least two reliable market data points support it, and in October 2026 the 126502 has one known sale. One result can reflect one eager buyer, so we show n/a rather than a falsely precise range.
What is Rolesium?
Rolesium is Rolex's name for combining Oystersteel with 950 platinum. On the 126502, the case and bracelet are steel, while the bezel ring and the caseback ring are platinum. The final digit 2 in the reference is Rolex's code for Rolesium, the same code used on Rolesium Yacht-Masters. Our materials guide covers the alloys.
What is a Grand Feu enamel dial?
It is a dial made by fusing powdered glass onto a metal base in a kiln at high temperature, often in several layers. The result is a deep, glossy white that does not fade. It is also brittle, so a knock can cause a chip or hairline crack that cannot simply be polished out.
Can I buy the 126502 from a Malaysian authorised dealer?
Not through a normal enquiry. It is off-catalogue, so there is no standard allocation and no official ringgit price. Rolex decides who receives these pieces, typically long-standing clients. Most buyers outside that circle will only see one on the secondary market.
Does the 126502 have a display caseback?
Yes. It has a sapphire caseback that shows calibre 4131, framed by a platinum ring. It is the first Daytona built around a steel case to have one.
Last updated . Written and fact-checked by the Rolex Malaysian editorial team. Specifications and prices are re-checked quarterly.